If you want to clean your car, then you can either go for simply cleaning its body and wheel or you can also choose to clean or you can also choose to clean both the interior as well as exterior of your car. So the first thing which you should is to clean the exterior of your car and then make sure that your car is cool and in the shade. There are special formulated cleaners which should be used to clean the car body parts and wheels. When you will start cleaning the interior of your car, then remove the floor mats and throw away the trash.

Here are some steps which you should follow to clean your car:

  1. Park your car in a shaded area

Always make it a point to clean your car whenever it is cool.  If your car is sitting in the sun, then wait for your car to cool down before cleaning it. The car would take around half an hour to cool down. You must wait for your car to cool down to avoid soap and water stains because heat can speed up the drying time of soap and water.

  1. Gather your supplies

Collect all the important things which you need while cleaning up your car. Place your buckets, a car cleanser, a sponge, a rough cloth, tire cleanser, towel near your car. You will require all of these materials to clean your car’s exterior.

  1. Fill two buckets full of water.

Use the first bucket for sudzing your cloth and the other one for rinsing your cloth. Fill up one bucket with the specially formulated car cleanser. Keep this thing in mind that you should not use dishwashing detergent or hand soap to clean your car. The reason behind this is that these harsh household cleansers would strip off your car’s wax.

  1. Rinse your car with a hose.

Before you apply soap on your car, rinse the entire surface of your car carefully. Keep this thing in mind that you should remove loose dirt and debris to avoid scratching your car. If there are any leaves and twigs on your car, then remove all of them with your car. You can remove the dirt, debris by setting the hose on a high pressure. But also make sure that it isn’t too high or else it would remove your car’s wax or paint.

  1. Clean your car from down to bottom

Work on one section of your car at a time. Once you have cleaned your car fully with soap, and then rinse each of its section with water. This would prevent the soap from drying onto your car.

  1. Lather the soap with your sponge

The next thing which you have to do is to scrub your car in a straight up and down motion. If you will scrub your car in a circular motion, then it would cause swirl marks.

  1. Rinse your sponge often

Now use the second bucket that contains water. If your sponge accidently falls on the ground, then rinse it in water once again. If you will not do so, then the debris on the sponge may scratch your car.

  1. Don’t let your car air dry.

It would cause watermarks and streaking. What you can do is to use a soft terry towel to dry it. Try blotting the water instead of wiping it so that it helps your car to dry.

If you are willing to change your car parts all by yourself and want to buy new ones, then all you have to do is to visit our online auto parts store https://partsavatar.ca/. We care for our customers and that’s why we offer the best quality of products at affordable prices.