Changing your own brake pads allows you to save some money and avoid the auto repair shop. Here’s how simple it is to change brake pads.

Brake pads are an essential component of your car, and you’ll want to be sure they are in tip-top condition. If your brake pads need to replaced, you can save a lot of money by doing it yourself.

To help you through this process, here is a simple guide to change brake pads safely and securely.

How to Know if Your Brakes Need Replacing 

Most brake pads need to replaced every 25,000 to 75,000 miles. If your car is checked regularly by a mechanic, they will recommend a brake change around 50,000 miles. By doing it yourself, you can save a few hundred dollars.

If your brakes are making any squealing or grinding noises, this can be another sign. An additional thing to look for is if your car pulls to one side.

Loosen Lug Nuts and Position the Car

Once you’ve decided to change the brake yourself, the first thing you should do is loosen the lug nuts with a tire iron and position it. Use a floor jack to raise the car enough to fit a jack stand in place.

Remove Both the Lug Nuts and Caliber Bolts 

Next, remove the lug nuts and locate the caliper assembly. Remove the bolts of the caliper assembly and put it to the side, keeping the brake line securely connected.

Remove Old Brake Pads and Replace Retaining Clips

You can now remove the old brake pads, but pay attention to how the brakes are oriented. This will give you familiarity when you install the new brake pads.

Usually, clips come with new brake pads, so don’t worry if the old ones are damaged.

Put in New Brake Pads 

Now, you’re ready to install the new brake pads. Using grease, slide the new pads into place. Make sure they are in the same position as the old brake pads.

If you’re looking for improved durability, be sure to check out dust free brake pads.

Position the Caliper 

Next, you should retract the pistons so you can position the caliper assembly on the new brake pads. Once retracted, the pistons should fit over the new pads easily. Though, sometimes you may need to use a socket wrench.

Reinstall the Tires and Tighten Lugs 

Now you can put your tire back on and re-tighten the lugs. Using the jack lift, you should be able to lower your car back down to its normal position.

Before you’re done, double-check the lugs are fully tightened with a tire iron.

Test Drive Your Car 

Before assuming the job is done, you need to test drive your car in a safe and secure area to ensure the brakes pads are working correctly.

The last thing you want to do is get on a busy road or highway. An empty parking lot or around the neighborhood should suffice.

If all looks well, you are good to go!

Now You Know How to Change Brake Pads 

Being able to change brake pads successfully saves you a lot of money, especially over time. It makes you a more independent driver and less reliant on mechanics.

By following these simple steps, you can feel better about safely changing your brake pads. Plus, once you’ve done it once, you’ll know how to do it in the future.

And if you found this article helpful, be sure to check out the rest of our blog. We have some other awesome articles on auto and motor topics that you’re sure to love!